5 tons Heavy industry battery electric trackless transfer cart
The trackless electric flat car, also known as the BWP type rubber
wheel electric flat car, uses batteries as energy and provides
power to the DC traction motor inside the electric flat car. The
electrical control system issues commands to drive the electric
train to operate various actions. Through remote control, commands
such as start, stop, forward, backward, and speed regulation are
issued. The tires are made of polyurethane solid rubber wheels, and
there is no need to lay steel rails on the ground, It can walk on
flat and hard roads inside the factory, breaking away from
traditional tracks and providing better maneuverability for flat
cars.
| RWP Technical parameters for electric transfer carts |
| 1 | rated load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 150 |
| 2 | impacted rated load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 | 225 |
| 3 | structure of frame | steel plates welded, beam structure |
| 5 | ground requirement | cement floor | steel plate ground |
|
| 6 | table size(mm) | 3000×2000 | 3600×2000 | 4000×2200 | 4500×2200 | 5000×2200 | 5500×2300 | 6000×2300 | 10000×3000 |
| 8 | ground clearance(mm) | 0-100 | 75 |
On the flat car, a universal wheel with free steering is added,
which can rotate in place when turning forward, further saving
space. However, in the face of remote control control, there are
still places where turning cannot be achieved in narrow areas.
Therefore, a small hydraulic system is installed at the bottom of
the flat car for lifting and lowering, allowing the entire flat car
to lift off the ground and the entire body to be suspended, with
only one support point at the center of the flat car, Workers can
simply rotate the entire table with their hands, and by lifting or
lowering the hydraulic pressure, they can easily adjust the
direction. Even in small spaces, they can carry it.
