20 tons Turntable transfer trolley realize the in-situ turning
Turntable transfer trolley is a kind of equipment to realize the
in-situ turning and reversing of track flat cars. Turntable
transfer trolley is installed at the intersection of two tracks.
One or more tracks are laid on the platform. The upper surface of
the track is flush with the upper surface of the track on the
ground, and the gauge is consistent with the gauge of the ground.
The flat car runs completely to the turntable and stops. The
Turntable transfer trolley starts to rotate to the required angle
to complete the docking with the track on the ground, The flat car
starts again and runs along the track after docking to the required
position, which can realize stop at any angle of 360 degrees, and
can also realize well type cross running. Turntable transfer
trolley is applicable to the annular track, cross track and other
occasions of the equipment production line. The rotary table system
operates stably, the track alignment accuracy is accurate, and full
automatic electrical control can also be realized. The rotary table
is arranged in a circular pit, and its surface is flush with the
ground.
| Modle | RMZ | RMZ | RMZ | RMZ | RMZ |
| Capacity(ton) | 5 | 10 | 25 | 40 | 50 |
| Turntable Diameter(mm) | ≥1500 | ≥2000 | ≥3000 | ≥5000 | ≥5500 |
| Turntable Height(mm) | 550 | 600 | 700 | 850 | 870 |
| Rotating Speed(r/min) | 3-4 | 3-4 | 1-2 | 1-2 | 1 |
work environment
Ambient temperature: - 20 ℃ - 40 ℃ Ambient humidity: relative
humidity ≤ 70%
Environmental PH: work in neutral or near neutral environment
Power connection duration: 25%
Air cleanliness: no corrosive floating objects, no flammable and
explosive gases
Application scope: 5s workshop, automobile mold, material transfer,
aerospace equipment workshop, air conditioning workshop, casting
mold workshop
Applicable materials: steel coils, aluminum coils, galvanized
coils, transformers, cable reels, castings, motors, containers,
carriages, pressure vessels, etc
