5 Tons loading and unloading transfer cart Conveyor transport
materials
In many production and operation processes,loading and unloading
transfer cart is not a separate operation of machinery, but an
integral part of the whole process. In the study and selection of
material handling machinery, not only should understand the
characteristics of material, handling of the purpose and
requirements, as well as homework whether interference and
pollution to the environment, also must consider, combined with the
whole process of production or operation to make handling machinery
with the before and after various close ties as a system, to reduce
the loading and unloading link, increase economic efficiency.
| RWP Technical parameters for electric transfer carts |
| 1 | rated load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 150 |
| 2 | impacted rated load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 | 225 |
| 3 | structure of frame | steel plates welded, beam structure |
| 5 | ground requirement | cement floor | steel plate ground |
|
| 6 | table size(mm) | 3000×2000 | 3600×2000 | 4000×2200 | 4500×2200 | 5000×2200 | 5500×2300 | 6000×2300 | 10000×3000 |
| 8 | ground clearance(mm) | 0-100 | 75 |
loading and unloading transfer cart can be roughly divided into
five categories according to its function: lifting machinery,
conveyor, loading and unloading machinery, handling vehicles and
storage equipment. Generally speaking, lifting machinery for
lifting and handling, but the handling distance is short, its
mechanism for intermittent movement; Conveyor can continuously
transport materials, transport routes are generally fixed, mostly
used to transport bulk materials; Loading and unloading machinery
can pick up and unload materials by itself. The loading and
unloading transfer cart can flexibly arrange the transport route,
the economic transport distance is long, can be indoor or outdoor
operation, with driving wheels; Storage equipment is in the
warehouse to complete the heap, take, storage material device,
including silo device, elevated warehouse and feeder. With the
development of industry, many machines have a variety of functions
and uses, for example, forklifts are handling vehicles, can be used
to load and unload, can also lift heavy objects. Material handling
machinery can be the last process of semi-finished products
directly, automatically transferred to the next process, the next
many processes into a system, the formation of rhythmical
production; In addition, the materials can be cleaned, dried,
painted, sorted, stored, inspected and measured at the same time in
the process of handling, so as to reduce the number of loading and
unloading, shorten the production cycle and save equipment
investment.
