40 Tons transportation electric transfer cart transport model
workpieces
With the promotion of transportation electric transfer cart, most
manufacturers have begun to replace the transportation equipment in
the factory. Among many models, the transportation electric
transfer cart is unique.transportation electric transfer cart is
not only simple to operate, but also saves time and labor without
laying tracks. Therefore, most manufacturers prefer trackless
transportation electric transfer cart without special working
environment. But you know what? In addition to those advantages
just now, there are many wonderful uses of the trolley bus that you
do not know.
| RWP Technical parameters for electric transfer carts |
| 1 | rated load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 150 |
| 2 | impacted rated load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 | 225 |
| 3 | structure of frame | steel plates welded, beam structure |
| 5 | ground requirement | cement floor | steel plate ground |
|
| 6 | table size(mm) | 3000×2000 | 3600×2000 | 4000×2200 | 4500×2200 | 5000×2200 | 5500×2300 | 6000×2300 | 10000×3000 |
| 8 | ground clearance(mm) | 0-100 | 75 |
The transportation electric transfer cart is equipped with the
lifting table of the hydraulic lifting system, which can better
adjust the height of the workpiece and facilitate processing; The
transportation electric transfer cart table is equipped with
U-shaped frame and V-shaped frame, which can also transport
workpieces with special shapes such as coiled materials; A weighing
system can also be installed to record the weight of the workpiece;
In addition, our trolleys have a certain climbing ability. Tell us
the climbing angle in advance, and our engineers can design a
suitable model according to the angle, so that the transportation
electric transfer cart can climb the slope smoothly.
It should be noted that our transportation electric transfer cart
uses polyurethane rubber coated wheels. Although polyurethane
wheels are more wear-resistant and durable than trackless wheels
made of other materials, they are not cast steel wheels after all.
During use, care should be taken to avoid sharp objects scratching
the wheels, which will affect the service life of the wheels.
Rubber coated wheels are more suitable for indoor operation on
relatively stable ground. If there is a relatively bumpy ground,
try to avoid it to ensure that the vehicle can be used for a longer
time.
